|
Original Formula Dri Wash 'n Guard®
(Classic)
| Dri Wash 'n Guard® cleans, seals, polishes
and protects cars, trucks, boats, recreational vehicles,
airplanes - virtually any non-porous surface - without using
any water. Thanks to exclusive formula Poly-Guard-3®,
you just spray Dri Wash 'n Guard® directly on the dirty
surface, wipe to a haze and buff off with a clean terry
cloth! Now you can have a just-detailed, showroom finish
without messy hoses, buckets, cleaners or waxes! Dri Wash 'n
Guard® contains no silicones, teflons or other ingredients
harmful to your vehicle's paint. |
|
| Place
an order |
|
But now you want to know, WHY IS IT POSSIBLE TO APPLY DRI
WASH 'N GUARD® OVER A DIRTY SURFACE? DRI WASH 'N GUARD® contains
47 ingredients, including wetting agents, lubricants and protectants
which have never been used by the car care industry. The detergents
and wetting agents in DRI WASH 'N GUARD® combine to soften and
emulsify surface grime, while a specific blend of polymeroxane
fluids and hydrophenolic lubricants attach a microscopic layer of
exclusive PolyGuard-3® to the surface. PolyGuard-3® is an
extremely rare (and expensive) substance which provides a bonded
layer of protection against any remaining abrasive not broken down
by the detergents and wetting agents.
Dri Wash 'n Guard® products maintain the new
appearance and condition of everything from cars, boats and other
vehicles to household, business, and personal belongings.
You may not own a million dollar show car, but you do
have a large investment in whatever vehicle you do own. When you can
clean, seal, polish and protect that vehicle's finish for $3.00 or
less, why would anyone risk their investment with cheap imitations?
Only Dri Wash 'n Guard® ensures superior results and protection,
because only Dri Wash 'n Guard® contains exclusive Formula
PolyGuard-3 (tm), the formulation that makes the original waterless
Car Wash outperform all imitators.
As the name implies, Dri Wash 'n Guard® with Exclusive
Formula PolyGuard-3®, was designed to leave your vehicle looking as
though it just left the paint booth, without the use of any water or
waxes.
Its designation as Dri Wash 'n Guard® is the result of its high
luminescence factor. When viewing from a distance, a vehicle
polished with Dri Wash 'n Guard® is literally bursting with
brilliance. But, "OUT SHINE' is only part of the story!
Wash & Polish Over Dirt!
One of the outstanding features of DRI WASH ’n GUARD®
is the fact that it can be applied to the finish of a dirty vehicle
and because of our Exclusive Formula PolyGuard-3®, without
scratching its surface. Since we wouldn't blame anyone for cringing
at the thought of dirt and grime being ground into the finish of an
expensive vehicle, we suggest the following test to prove it really
does work.
Start the test by polishing an inconspicuous area, such as a dirty
portion underneath the hood or trunk lid, or around a door opening.
As you gain confidence, try polishing a dirty chrome bumper, a
tail-light lens, a lower quarter panel. It won't be long 'til you're
testing it on the hood, the trunk lid, and whatever else is left!
Suddenly, the truth will become apparent - A regular wash-job will
leave scratches, DRI WASH ’n GUARD® will not!
Washing any car will eventually take its toll. Sooner or later, the
paint will become dull and contain an uncountable number of tiny
scratches called feather scratches. DRI WASH ’n GUARD® with
Formula PolyGuard-3® cannot scratch; and it most certainly will not
dull the finish!
Think of the time, money and effort you'll save by not having to
wash and dry your car before polishing! Think of not using or
wasting one drop of water!
Place
an order
You Say It Won't Scratch My Car?
How does DRI WASH ’n GUARD® with Exclusive Formula
PolyGuard-3® prevent scratches? Actually, it's a combination of
factors, each working simultaneously and independently of each
other.
When you spray a section of an unwashed vehicle with DRI WASH ’n
GUARD®, notice that we said "spray". Each
"spray" either covers or surrounds any dirt particles with
thousands of individual droplets - each less than .015" in
diameter. The droplets that cover begin to soften, emulsify and lift
the dirt particles immediately, due to the generous supply of
cleaning agents contained in the formula. The droplets that surround
prevent the dirt particles from coming in contact with the surface
because a combination of special lubricants keeps them in a state of
suspension until they are absorbed by the application cloth.
Although this cloth is absorbing all the dirt, it is also becoming
saturated with lubricants, so it never does reach a point where it
is too dirty to use." In short, a single application cloth will
easily wash and polish one vehicle.
Place
an order
Driwash N' Guard is a Glass Cleaner
Too!
Another distinguishing feature of DRI WASH ’n GUARD®
is that it's a fantastic glass cleaner and sealant. In fact, DRI
WASH ’n GUARD® is capable of bonding to glass for a year or more.
You'll see this for yourself each time you drive in the rain.
Instead of lying in sheets on the windshield, water scatters off the
glass like it's being chased. DRI WASH ’n GUARD® makes "bug
removal" so much easier, too. The invisible coating works on
the same principle that prevents eggs from sticking to the TEFLON
surface of a frying pan. Other polishes, waxes and paint sealants
are NEVER recommended for use on glass because of the oily film they
leave behind. This can be hazardous under certain conditions, such
as when headlights approach at night or when windshield wipers are
turned on during a light rain. DRI WASH ’n GUARD® leaves NO oily
residue, which makes it totally safe and highly recommended for all
your glass cleaning needs.
Place
an order
How About Economy?
Are you ready for this? DRI WASH ’n GUARD® comes in
the industry's first REFILLABLE AIROSOL BOTTLE!!! For high
volume users - such as detail shops, auto dealers, and body shops
buying in large quantities is a necessity. Since aerosol containers
don't come cheap, they've never been much of a hit with the
high-volume boys. Well, now you can have your cake and eat it too,
because DRI WASH ’n GUARD® can be purchased in economical
refills, and the AIRosol bottle is refillable! Because the AIRosol
bottle meters out the contents in the form of a fine mist, a little
DRI WASH ’n GUARD® goes a long way. An average-size car is
typically washed and polished with 2 oz. of liquid, which means you
can expect FOUR FULL wash and polish jobs from a single 8 oz.
bottle...including windows! When the bottle is empty (it sprays down
to the last drop!), simply remove the spray mechanism, top it off
with a fresh supply from our 32 oz. REFILL bottle, and you're ready
to go again.
The COMBO-PAK provides a 32 oz. and EMPTY SPRAY BOTTLE in one
package, thus saving the hassle of having to return to the store
every time the spray bottle needs refilling. Furthermore, the
"cost-per- ounce" factor of the COMBO-PAK is lower than
the sum of its parts, making it an attractive package for the
frequent user.
Right now, you're probably saying to yourself, okay I've refilled
the spray bottle; but how do I repressurize it?" Would you
believe you can do it yourself in less than 15 seconds! The DRI WASH
’n GUARD® cap does double-duty as an Air Compressor of sorts. You
simply place it in position on top of the bottle and begin pumping
up and down...using short 2" strokes. It takes only 5-8 pumps
yet will develop enough pressure to spray the 2 oz. of fluid
required to wash and polish an entire car! Since you're
repressurizing the contents with AIR ONLY, it's environmentally safe
for the ozone - which is why we refer to it as an AIROSOL:"
It's important to note, too, that the DRI WASH ’n GUARD® AIRosol
bottle can be overpressurized. If too much air is forced into the
cylinder, you could strip the cap off or break the bottle.
Place
an order
99 Reasons for using AIRosol
Why use an AIRosol bottle in the first place? Why
not a trigger: sprayer, or a simple "pour-as-you-go"
bottle? First of all, because DRI WASH ’n GUARD® is such a low
viscosity, pouring was out of the question. It pours right through a
rag, for example, and runs off the hood of a car into the ground. A
trigger sprayer is a big improvement, but only to a point. The
high-quality AIRosol bottle was chosen to use to meter out
DRI WASH ’n GUARD® in the precise pattern needed for our
"wash and polish-over-dirt" theory to work. Plus, it
requires only a very light pressure on the nozzle to make it
spray...no pumping till your wrist aches; no "lost
droplets" at the end of each pump. Unlike other aerosols, this
one produces no COLD SHOCK as you spray. The bottle is just the
right size...fits comfortably in your hand...slips easily into your
front pocket when used during buffing operations. And, yes, you'll
really appreciate the convenience of the DRI WASH ’n GUARD® spray
when washing and polishing the side of a vehicle. No more messy
pouring spills. When Dri Washing a door, for example, all of the
product goes to the door...and stays there. And, because you can
actually see the product being applied to the surface, you don't use
more material than is necessary. It can average as little as 33
cents per week to wash, polish, and seal the entire surface of an
automobile for two Years! Need we say more? "Yes! DRI WASH ’n
GUARD® is fast, convenient and-economical to use, and best of all
you'll save precious water when you use it.
Place
an order
A "Major League" Product!
But just how good can a spray wax be? For most spray
waxes...not very. However, DRI WASH ’n GUARD® is not most spray
waxes. If used occasionally, in place of a wash-job, DRI WASH ’n
GUARD® will make a used car look new, and a new car look BETTER
than new. If sprayed on and buffed into the surface with a high
speed buffer, a "one-time application" will lock in the
shine and protection for up to a year or more.
With older cars, the more neglected the paint, the greater the need
for DRI WASH ’n GUARD® to be applied with a buffer. In instances
of extremely dull paint, it may even be necessary to go over the car
first with a rubbing compound. But, in MOST cases - even advanced
cases of oxidation (like, when a red car develops a bluish-green
cast), all that is necessary is for DRI WASH ’n GUARD® to be
buffed in...again, without benefit of washing and drying. The
results will be SPECTACULAR! The surface brilliance will be so
intense you'll think the vehicle is wearing a halo!
Place
an order
Professionals Will Love
Using Dri-Wash!
Professional users of DRI WASH ’n GUARD® will
especially appreciate the ease with which this product can be
applied. it's as simple as: SPRAY IT ON - BUFF IT IN. Even if
performed on a "dirty" vehicle, you won't have to change
to a "clean" buffing pad midway through the job.
Miraculously, buffer pads can be used over and over when using DRI
WASH ’n GUARD®. An occasional cleaning with a spur or screwdriver
or a compressed air blower is all that is needed.
Place
an order
No Swirl Marks!
Better still, is the fact that DRI WASH ’n GUARD®
leaves NO buffer swirls. In fact, it can even be used - and should
be used - to remove, buffer swirls left by other products (such as
rubbing compounds). All that is required is to buff
"cross-grain" ... or, in small circular motions. And, as
if that wasn't enough, you'll find it virtually impossible to burn
paint when using this super-slippery polishing glaze.
Place
an order
Black Chrome
Are there any other features worth mentioning? Well,
we've hardly scratched the surface (PUN INTENDED). Here's another
example: DRI WASH ’n GUARD® will not stain black chrome! Most of
the trim and protective moldings on today's cars and trucks are
either rubberized, plastic, or painted a "flat" color.
Often, the color is black - hence, the name "black
chrome."
When black chrome is polished with most polishes and waxes, it turns
"white" and is all but impossible to remove. DRI WASH ’n
GUARD®, on the other hand, is easily removed from black
chrome...leaving it shiny and protected in the process.
Place
an order
Will Wet Paint Stick to DRI WASH
’n GUARD®?
Body shops, too, will "rejoice knowing that no
special preparation is necessary when repainting vehicles coated
with DRI WASH ’n GUARD®. A normal degreaser such as "Prep
Sol" or "Enamel Reducer is all that is needed. To prove
this to yourself, polish an old damaged fender, a large metal
barrel, or whatever else is handy with DRI WASH ’n GUARD®. After
buffing off the polish with a dry cloth, try painting the surface
with an aerosol spray paint. For paint to adhere to such a slippery
surface seems downright magical but it will!
While we don't advocate the use of DRI WASH ’n GUARD® as a
primer, at least it's comforting to know that it will present no
special problems for body shop personnel.
Place
an order
Don't Forget to Polish the Edge of
the Hood?
Ever notice the way most waxes and polishes
"cake-up" around Panel edges? Six months after the car was
polished, those big white Pasty layers are still clinging to the
edges of the hood, trunk lid, etc.. Not so with DRI WASH ’n GUARD®...even
if buffed. Of course, if you own a white car, you'll probably never
appreciate this bonus!
Place
an order
DRI WASH ’n GUARD® Has Many Other
Uses
Another outstanding feature of DRI WASH ’n GUARD® is
its versatility. Although officially designated as an
"Automotive Waterless Wash and Polishing Glaze," DRI WASH
’n GUARD® may also be used on a wide variety of non-automotive
surfaces; boats, painted metals, glass, chrome mirrors, smooth
plastics, formica, porcelain, brass, aluminum, and fiberglass are
but some of the many surfaces that may be successfully polished and
protected with DRI WASH ’n GUARD®. In short, DRI WASH ’n GUARD®
may be used on any hard, nonporous surface. Because of this
versatility, DRI WASH ’n GUARD® can take the place of many
household cleaners and polishes. Window panes, bath mirrors, sinks
& fixtures, microwave oven doors, stoves, refrigerators, glass,
eyeglasses, etc., are just a sample of the many uses around the home
for this truly remarkable product.
Boats, motorcycles, snowmobiles, steel siding and many other
high-ticket items that spend their entire existence exposed to the
elements. Needless to say, they'll appreciate DRI WASH ’n GUARD®'s
extra measure of protection as much as your car does.
Place
an order
What About Compatibility
Are there any products with which DRI WASH ’n GUARD®
will react adversely? YES... WATER!
For the same reason water runs off a DRI WASH ’n GUARD® surface.
DRI WASH ’n GUARD® will not bond to a water-laden surface...even
if it's just a few drops. There's nothing wrong with applying it
over another brand of wax or polish, though. In fact, it'll strip
through layers of dull wax as though they never existed.
If applied BY HAND to a surface recently protected with another
brand of paint sealant, there's a very slight possibility that the
finish will become somewhat difficult to remove and/or cause minor
streaking. However, if applied BY MACHINE, the only possible
negative reaction might come when the owner of the vehicle realizes
what a fool he was to spend hundreds of dollars on Paint Sealant in
the first place!
Place
an order
You'll Love it at First Sight
By now you've probably noticed that this is getting to be
a very long "PRODUCT INFORMATION REPORT". That's what
happens when you've got a product long on features. It's even
possible that you may have more important things to do than read THE
CONTINUING SAGA of DRI WASH ’n GUARD®. So, we're going to dim the
lights, turn off the sirens, and leave you with one final thought.
DRI WASH ’n GUARD® with Exclusive Formula PolyGuard-3® is about
to become one of the most sought after CLEANING and PAINT
ENHANCEMENT PRODUCTS in the world...we've already given you
all the alluring reasons why. In the meantime, all we're asking is
that you give us a try. Besides doing your car a favor, you'll be
doing free DRI WASH ’n GUARD® commercials for us everywhere you
park your car!
Place
an order
32 oz. Bottle: $40.95 US
Place
an order
|
U.S.A. Quick Order
Canada Quick Order
